Table of Contents
Advertisement
Note
Wi-Fi Direct connects smartphones and computers directly to the TV instead of
through the Internet, so streaming video content that requires an Internet connection
cannot be played back on the TV.
1
Press the
[Settings] — [Network & Internet] — [Wi‑Fi Direct] — [Wi‑Fi Direct settings].
2
Select the TV name displayed on the TV screen with the Wi-Fi Direct device.
If the device does not support Wi-Fi Direct, select the [Show Network
(SSID)/Password].
3
Operate the Wi-Fi Direct/Wi-Fi device to connect with the TV.
4
Send content from the Wi-Fi Direct/Wi-Fi device to the TV.
For details, refer to the instruction manual of the device.
If connection is not successful
When the standby screen for the Wi-Fi Direct setting is displayed, select [Show Network
(SSID)/Password] and follow the on-screen instructions to complete the set-up.
To connect another device
Follow the steps above to connect devices. Up to 10 devices can be connected at the
same time. To connect another device when 10 devices are already connected,
disconnect an unnecessary device, then connect the other device.
To change the name of the TV shown on the connected device
(Quick Settings) button on the remote control, then select
Advertisement
Table of Contents
