Advertisement
CONNECTIONS
CONNECTING
THE
SPEAKER
CORDS
1. Peel
away
the vinyl covering and twist the strands
together.
2. Push down the lever and insert the cord into the hole.
Connect (+) to the (+) side
on the speaker.
Connect (—) to the (—) side on the speaker.
Release the lever and then pull the cord to check that it has
been connected properly.
Speaker Impedance
Use speaker
systems
with an impedance
ranging from 6
ohms to 16 ohms. When
connecting two pairs of speaker
systems
for simultaneous
use, select models with an im-
pedance
of between 12 ohms and 32 ohms. Make a note of
the allowable
input of a speaker system
which
is not a
model specially designed for this amplifier.
CONNECTING
UNIT CONNECTIONS
Connect the amplifier's terminals and the connecting unit
using the accessory cord.
[To THE CONNECTING
UNIT]
input
PHONES,
lo
Le
!
Connecting cord
with pin plugs
CONNECTING
UNIT: PARTS AND THEIR
FUNCTIONS
MIC/LINE
MIC/GUITAR
LING
a)
~@ > MIC/LINE (1) terminal
The output
cord of a microphone
or electronic musical
instrument can be connected here. Adjust the volume using
the amplifier's fader control
[1]
. Set the position of the
MIC/LINE
selector
in accordance
with
the component
which has been connected.
@
MIC/GUITAR @ terminal
The output cord of a microphone or electric guitar can be
connected
here. Adjust the volume
using the amplifier's
fader control
. Set the position of the MIC/GUITAR
selector in accordance with the component which has been
connected.
©
LINE terminal
The output cord of an electronic musical instrument can be
connected here. Adjust the volume using the amplifier's
LINE fader control.
@
PHONES jack
Connect the headphones plug here.
This comes
in handy when monitoring the sound which is
being mixed.
Advertisement
