Advertisement
VOLTAGE
VARIATIONS
For General
Export
Model(S,S/G)
VOLTAGE
SELECTOR
You will find the line voltage selector switch on rear panel. This
switch has positions for 110V,120V,220V and 240V power sources.
Before your model is shipped from the factory, the switch is set to
the power requirements of the destination; nevertheless; you should
check that it is set properly before plugging the power cord into
the AC outlet. If the voltage is not properly set or if you move to
an area where the voltage requirements differ, adjust the selector.
switch as follows. Before adjusting, disconnect the power cord.
_
1. Prepare a medium size screwdriver.
2. Insert the screwdriver into the arrow on the voltage selector
.
;
ee
and adjust so that the tip of the arrow points to the voltage
Medium size screwdriver
value of your area.
120V
Advertisement
