Pioneer SA-05 Operating Instructions Manual page 15

SOUND MIXING OPERATIONS
PITCH control
This can be used to vary the record's rated
speed across a +6% to —6% range, and it
comes in handy when aligning the musical
Pioneer's PL-05 turntable intervals.
"6" is the standard setting for the SOURCE and faders.
To PHONES terminal
Always use the MIC/GUITAR [2] terminal when
connecting the guitar directly.
SINGING ALONG WITH PRE-RECORDED TAPE
ingi et with e-recorded tape
Singing a duet with a pr orded tap piéieconded wane
> DEE ATTA ANE TNA
ies
"8" is the standard position for the [1] , _, TAPE faders.
To MIC/LINE @] terminal
PITCH control
This can be used to vary the
tape's rated speed across a +6%
to —6% range, and it comes in
handy when aligning the musical
intervals.
MIC/LINE selector and electronic musical instruments.
The output of the electronic musical instrument can be connected directly to the MIC/LINE J terminal in which case its volume control
should be turned down as far as possible.
15