Advertisement
Have the speakers not been properly selected by the
SPEAKERS selector switch?
Mode selector door position?
-» NORM
Wrong
FUNCTION switch operated?
> MIX
Is mixing fader at "'Q''?
Wrong SOURCE selector operated?
Has graphic equalizer's power switch been pressed?
No
sound
even'
when
MASTER
VOLUME
con-
trol is slid up.
Press the right switch.
Connect the cords properly to the terminals.
Press the right switch.
Slide up fader.
Press right SOURCE selector.
Set to ON.
Release to OFF position.
Refer to pages 5 and 6, and connect properly.
Has one of connecting cords. become disconnected?
Set control to center position.
Connect cord to terminal properly.
Connect plug to terminal properly.
Low
sound
even'
when
volume control is slid up.
and then slide volume control upward.
Select correct selector position.
Slide up fader.
Wrong MIC/LINE, MIC/GUITAR selector position?
Is mixing fader control position too low?
Microphone volume does not
increase.
Wrong fader selection?
.
Slide up correct fader control.
Set to MIC position.
Re-connect properly.
Slide down door to set to MIX mode.
NORM mode?
Select left and right ON switches properly and press.
Slide up control.
Slide down door to set to MIX mode.
23
Advertisement
