How Does Charging Work - Wattsun DOCK+ Instruction Manual

How does charging work?

With Wattsun Charger (360/600W)
A
B
Dock+
1. Connect the Wattsun Charger 360 or 600 to the power supply (230 volts / 110 volts).
2. Elevate the cover on the back of the product.
3. Plug the charger's connector into charging port B (STEP 1).
4. Turn the connector to the right (STEP 2) until you hear a click (STEP 3). The charger is
now locked.
5. Press the charger power button and the battery will charge.
6. The display on the Dock+ shows the status of the battery. On the Packs, the five LEDs
indicate the status of charging.
7. The Wattsun Dock+ can be charged when it is off or on. The Pack is automatically off
when not in the stack.
8. When both the power charger and the smart charger are connected, the Dock+
charges with AC power.
9. Charging in stack? See page 30.
10. Never use any charger other than the original one supplied (Wattsun Charger 360
or Wattsun Charger 600).
STEP 1 STEP 2
28 - English
B
Pack
STEP 3
With smart charger (9-42 Vdc)
A B
Dock+
1. The Wattsun Dock+ can be charged with solar panels with voltages from 9 to 42 volts
DC, among others.
2. Elevate the cover on the back of the product.
3. Plug the Wattsun DC-adapter into the charging port A (STEP 1).
4.. Turn the connector to the right (STEP 2) until you hear a click (STEP 3). The charger is
now locked.
5. The Dock+'s display will show the status of the battery.
6. When both the Wattsun Charger and the Wattsun DC adapter are connected, the
Dock+ is charged by the Wattsun Charger.
7. The Wattsun Dock+ can be charged when it is off or on. The Pack is automatically off
when not in the stack
8. Charging in stack? See page 30.
9. Never use any charger other than the original one supplied smartconnector
Vdc)..
Connect the Wattsun DC adapter in the
same way as the Wattsun Charger
(see steps on the page opposite).
29 - English
(9-42