Page 1
WATTS UN D O C K + WATTS UN PAC K NL - Handleiding EN - Instruction manual M OD E LS WSDPLUS/230V WSDPLUS/110V WSP1600 hello@wattsun.net | www.wattsun.net...
For technical enquiries, please contact customer support. Mail je vraag naar hello@wattsun.net. Mail your questions to: hello@wattsun.net. Kijk voor meer informatie op www.wattsun.net, of scan onderstaande QR-code. For more information go to: www.wattsun.net, or scan the QR code below. Inhoudsopgave Table of contents Algemene veiligheidswaarschuwingen...
Bestudeer de handleiding voordat je de Wattsun Dock+ en Pack gebruikt. Als je deze veiligheidsinstructies niet opvolgt, kan dit leiden tot brand, een elektrische schok, letsel, of schade aan het product of aan andere eigendommen.
Zet de Dock+ altijd uit na gebruik. • Doe dit door de aan/uit-drukknop 4 seconden ingedrukt te houden. • Berg de Wattsun droog en schoon op. • Berg de Wattsun nooit met een lege batterij op (voorkeur >50%). 6 - Nederlands 7 - Nederlands...
Dock+ Sluit de Wattsun Charger 360 of 600 aan op het stroomnet (230 volt). De Wattsun Dock+ kan geladen worden met o.a. zonnepanelen met een voltage van 9 tot 42 volt DC. Lift het klepje aan de achterzijde van het product.
Stack 30 - 0 % ERROR Met de Wattsun Dock+ kun je een hele stapel met één lader laden. Bij een systeemfout knipperen alle LED-lampjes rood. Zorg dat de Wattsun Dock+ aanstaat. Sluit een Wattsun-lader aan op de Wattsun Dock+, zoals op de pagina’s hiervoor beschreven.
Laden tijdens gebruik Laden 00:00 Bij opladen in plaats van ontladen De Wattsun Dock+ is aan het laden. verandert output power in charge Batterijstatus van Wattsun Dock+. Time remaining power. Charging 0000...
Wattsun resetten Voorkom dat de temperatuur weer afneemt. Wattsun needs to warm up Wil je de Wattsun resetten? Houd de aan/uitknop 20 seconden ingedrukt. Temperature (cool down) De temperatuur in het product heeft Temperature de maximale bedrijfstemperatuur overschreden.
Temperatuur bij opslag 0 tot 30 °C CE - verklaring (EU) Relatieve luchtvochtigheid 10 - 90% Wattsun pop-up power B.V. verklaart hierbij dat de volgende producten: WSDPLUS/230V, Beveiliging WSDPLUS/110V en WSP1600 voldoen aan de volgende CE richtlijn: AC output-beveiliging Kortsluiting- en overbelastbescherming...
2. Reinig het product met een zachte borstel. Werk niet met het product bij slechte weersomstandigheden, met name niet bij opkomend onweer. 3. Controleer de (Wattsun Charger 360 of 600) lader voor gebruik. Gebruik het product alleen bij daglicht of goed kunstlicht.
Reinig de behuizing van het product regelmatig en zorgvuldig. Borstel met een schone en Zet de Wattsun Dock+ uit voor transport. De Wattsun Pack is automatisch uit wanneer zachte borstel het vuil van de buitenkant van het product. Reinig vervolgens met een licht deze niet in een stapel geplaatst is waarvan de Dock+ aanstaat.
Wattsun Dock+ pluggen. de Wattsun Dock+ geplugd. De Wattsun Pack geeft ERROR aan. Controleer de Wattsun Pack en stapel de Pack opnieuw op de Dock+. Is het probleem nog niet Het vermogen van je elektrische...
• Do not carry out maintenance yourself: there are no parts that are to be maintained by the user; for maintenance contact customer service. • Do not open the product. • Do not use running water or a high-pressure to clean for cleaning the Wattsun Dock+ and Pack. Symbols Meaning Hazardous voltage.
How does it work? Set up • Carry the Wattsun with both hands. • Place the Wattsun on a safe, dry, flat and stable surface. • Place the Wattsun on four legs. Connecting • Hold the power button for 4 seconds.
Dock+ is charged by the Wattsun Charger. The Wattsun Dock+ can be charged when it is off or on. The Pack is automatically off The Wattsun Dock+ can be charged when it is off or on. The Pack is automatically off when not in the stack.
In case of a system error, all LED lights blink red. Make sure the Wattsun Dock+ is turned on. Connect a Wattsun charger to the Wattsun Dock+, as described on the pages above. Both charging ports are suitable for charging in stack.
PK2 PK3 PK4 the display and the battery level indicates module is displayed. 100%. 3. The Wattsun Dock+ is denoted by ‘DCK’, the Wattsun Packs from bottom to top by ‘PK1’, ‘PK2’, ‘PK3’, ‘PK4’. 32 - English 33 - English...
Page 18
Prevent the Wattsun reset temperature from decreasing again. Wattsun needs to warm up Want to reset the Wattsun? Press and hold the power button for 20 seconds. Temperature (cool down) The temperature in the Wattsun has Temperature exceeded the limit.
Storage temperature 0 to 30 °C CE - statements (EU) Relative air humidity 10 - 90% Wattsun pop-up power B.V. hereby declares that the following products: WSDPLUS/230V, WSDPLUS/110V en WSP1600 meet the following ce-statements: Security AC output protection Short-Circuit and overload...
Check the product before use and after an incident for any damage and have it 4. Charge the product. Including before long-term storage. repaired if necessary. For service and repairs contact us via hello@wattsun.net. 5. Check the power cord of the electrical device you want to Do not use the product while being in a state of overall poor judgement, when you connect to the Wattsun Dock+ before each use.
When storing the product for a longer period of time, there are two important factors that Do not dispose of the Wattsun Dock+, the Wattsun Pack or the Wattsun Charger 360 or 600 influence the overall condition of the battery.
Some electrical devices have a start-up peak Faulty power cord. Replace the power cord. device is too high. that is too high, causing the Wattsun Dock+ to Charger not properly connected. Connect the charger properly. switch to security mode. These products cannot be used in combination with the Wattsun Dock+ Mains voltage out of range.
Page 23
WATTSUN POP-UP POWER BV Westervoortsedijk 73 CB 6827 AV Arnhem, The Netherlands KvK nr: 65291395 BTW nr: NL8560.53.594.B01 hello@wattsun.net +31 85 200 6347 WW W.WAT TSU N .NE T 44 - Nederlands...