Display Wattsun Dock - Wattsun DOCK+ Instruction Manual

Display Wattsun Dock+

Starting up
Use
1. Remaining time in hours and minutes
with current use.
2. Total battery level of the Stack.
3. Current use expressed in watts.
4. Number of modules stacked on the
Dock+.
Charging while using
1. When charging instead of discharging,
output power changes to charge power.
2. When charging and discharging
simultaneously, the display shows net
consumption.
State of charge (SOC)
1. Press the power button once to see the
battery status.
2. At a glance, the battery status in % per
module is displayed.
3. The Wattsun Dock+ is denoted by 'DCK',
the Wattsun Packs from bottom to top
by 'PK1', 'PK2', 'PK3', 'PK4'.
32 - English
1 2
00:00
Hrs
Time remaining
0000 0
Watt
100%
Output power Packs
3 4
00:00
Hrs
Time remaining
0000 0
Watt
100%
Charge power Packs
SOC %
DCK PK1 PK2 PK3 PK4
100 100 72
Wattsun Operating System
Press the power button in quick succession
twice to see which version of the operating
system (OS) your module(s) works with. In
case of a malfunction, please report the
correct OS to our customer service to solve
the problem as soon as possible.
Auto Power Down
1. The Wattsun Dock+ turns off after 90
minutes of inactivity.
2. Customize? Choose 90, 60, or 30
minutes.
3. Choose off to completely disable Auto
Power Down.
4. Press and hold the power button for 4
seconds to confirm the selection.
Charging
1. The Wattsun Dock+ is charging.
2. Battery level of the Wattsun Dock+.
Cell balancing
Starts automatically when the battery
reaches 99%. Leave the charger on until the
'Charging complete' message appears on
the display and the battery level indicates
100%.
33 - English
Wattsun OS
DCK PK1 PK2 PK3 PK4
B27 B27 B27
S27 S27 S27
Auto Power Down
Long press to edit
90 Min.
Caution! Avoid leaving the battery empty
for weeks.
Charging
0%
1 2
Cell balancing
99%