Maintenance; Storage; Transport; Waste Disposal - Wattsun DOCK+ Instruction Manual

Table of Contents

Advertisement

Available languages

Available languages

Maintenance

Cleaning the casing
It's important to clean the casing of the product regularly and carefully. Brush the dirt off the
outside of the casing with a clean and soft brush. Then, clean the casing again with a damp,
soft cloth. Always make sure the product is dry before storing. During cleaning, check for any
damaged parts that may affect the proper operation of the product. Have damaged parts
repaired before using the product. Please contact Wattsun customer service for service and
repairs.
Cleaning the dust filters
There are two dust filters (four in total) located on the front- and back- of the product, which,
like the casing, must be cleaned regularly and carefully. With daily use, it's recommended to
clean the dust filter four times a year. With weekly use, twice a year is sufficient.
Unscrew the ventilation grill from the product by hand with
a hexagonal wrench 2.5. Remove the dust filter from the
designated space and get rid of the dust from the dust filter.
For stubborn dirt, blow or vacuum clean. Place the dry filter
back in the product. Then screw the ventilation grill back with
the "point" pointing upwards (see image on the right). During
cleaning, check whether any parts are damaged that may
affect the proper operation of the product. Have damaged parts
repaired before using the product.

Storage

When storing the product for a longer period of time, there are two important factors that
influence the overall condition of the battery.
1. The ambient temperature; choose a dry storage room with an ambient temperature of
15 ° C to 25 ° C, store the product without it being exposed to bright daylight.
2. The charge percentage of the battery; charge the battery to around 50% before
storing it for a long period of time. Regularly check if the battery level remains around 50% if
you do not use the product for more than 6 months.
We also recommend cleaning the product before storing it for a longer period of time. In addi-
tion, ensure that the product is placed on the floor so it cannot fall.
40 - English

Transport

1.
Turn off the Wattsun Dock+ before transport. The Pack is automatically turned off
when it's not being used in a stack.
2.
Make sure the product is secured properly. Prevent the product from sliding or
tumbling.
3.
The modules contain lithium-ion batteries. Always consult an expert on hazardous
goods before shipping.
4.
When using a third party for shipping, (e.g., air- or road transport) special requirements
regarding packaging and marking are applicable.
5.
Always make sure to comply with all laws, rules, and regulations applicable in your
country.
6.
Always make sure the product is placed on its four feet during transport.
7.
Do not stack the product during transport or shipping.
8.
Use suitable loading tools (loading dock or lift) to get the product in or out of a
vehicle. The product should always be carried with both hands.
9.
The product must always be carried with both hands.

Waste disposal

Do not dispose of the Wattsun Dock+, the Wattsun Pack or the Wattsun Charger 360 or 600
in household waste.
Contact customer service and we will come to collect your products and ensure
recycling and/or a second life of the battery.
41 - English

Advertisement

Table of Contents
loading

This manual is also suitable for:

PackWsdplus/230vWsdplus/110vWsp1600

Table of Contents