Children should be supervised to ensure that they do not play with the appliance. • Only use with Ozito PXC Jet Blower PXJBS-018/PXJBGS-1820 according to the instructions and warnings given with the appliance and in this manual.
SETUP & PREPARATION 1. ASSEMBLY WARNING! ENSURE THE TOOL IS SWITCHED OFF AND THE BATTERY IS REMOVED BEFORE PERFORMING ANY OF THE FOLLOWING TASKS. Installing the Roof Guttering Cleaning Set 1. With the Nozzle attached to the jet blower, slide the Adaptor over the outlet of the nozzle as far as it will go, aligning the adaptor grove (a) with the raised tab (b) on the outlet of the nozzle so it is in line with open (c) as you do this.
Page 5
3. Screw the 400mm Extension onto the Adaptor. 4. Depending on your requirements, screw on more 400mm extensions or the Gutter Nozzle. Note: Maximum of three extensions should be equipped for a approximate tool length of 1.8 metres, suitable for most single story buildings. DO NOT use for application above recommended gutter height of 3.3 metres.
OPERATION 2. APPLICATION WARNING! DO NO USE THE JET BLOWER WITHOUT THE NOZZLE ATTACHMENT. WARNING! ALWAYS WEAR APPROPRIATE PERSONAL PROTECTIVE EQUIPMENT (PPE) WHEN USING THE BLOWER, SUCH AS STURDY, NON- SLIP FOOTWEAR, LONG TROUSERS, SAFETY GLASSES AND HEARING PROTECTION. NEVER USE EQUIPMENT BAREFOOT OR IN SANDALS. The Brushless Jet Blower with Roof Guttering Cleaning Kit is designed for clearing away loose and light debris, such as leaves and moss from roof guttering.
Check with your local council authority for recycling advice. SPARE PARTS Spare parts can be ordered from the Special Orders Desk at your local Bunnings Warehouse. For further information, visit www.ozito.com.au or contact Ozito Customer Service: Australia 1800 069 486 New Zealand 0508 069 486...
Page 8
OZITO 25 Fox Drive, Dandenong South, Victoria 3175, Australia.
Need help?
Do you have a question about the PXC PXJBGS-1820 and is the answer not in the manual?
Questions and answers