Kenwood TM-V7A Service Manual page 49

Transmission section
ADJUSTMENT
TM-V7A/E
Measurement Adjustment Specifications/
It Conditi Test-
em ondition equipment Unit | Terminal Unit Parts Method Remarks
1. Transmission | 1) U band f.counter | Rear ANT TX-RX TC1 444.000MHz:k | Not warm up the set.
frequency FREQ.:444.000MHz:K | Dummy | panel (A/4) 435.000MHz:M,E | —100Hz
FREQ.:435.000MHz:M,E
2-1. POWER =| 1) POWER:LOW step6-1_|
Power Rear ANT Display
|Encode!UP/DOWN
| 5.0W+0.5W
VHF band FREQ.:CH4 meter panel
Transmission.
Ammeter
2) POWER:MID step6-2 12.0W+1.0W
Transmission.
3) POWER:MAX step6-3 Check 48.0W
Transmission.
4) POWER:HI step6-3 Display |Encode|UP/DOWN |MAX Power 52W or
Transmission. more .
50.0W-+1.0W
MAX Power 48W or
more .
(MAX Power —2W)
+1.0W
5) FREQ.:CH5 Check 44~60W
POWER:HI
Transmission.
6) POWER:MID 10~14W
Transmission.
7) POWER:LOW 3~10W
Transmission.
2-2. POWER 1) POWER:LOW step6-4 | Power Rear ANT Display | Encode |UP/DOWN | 5.0W+0.5W
UHF band FREQ.:CH4 : meter pane!
Transmission.
2) POWER:MID 12.0W+1.0W
step6-5
Transmission.
3) POWER:MAX step6-6 Check 33.0W or more
Transmission.
4) POWER:HI step6-6 Display | Encode {UP/DOWN |MAX Power 37W or
Transmission. more .
35.0W+1.0W
MAX Power 33W or
more .
(MAX Power —2W)
+£1.0W
5) FREQ.:CH5 Check 28~42W
FREQ.:CH6
POWER:HI
Transmission.
6) POWER:MID 10~14W
Transmission.
7) POWER:LOW 1~4W
Transmission.
49