Advertisement
« TRANSPOSE operation
(1)Hold TRANSPOSE button down.
The LED above the PIANO 1 button lights to show that the MR120 is
currently in the key of C.
(2)While still holding down the TRANSPOSE button, press one (or two)
TONE SELECTOR button(s) to set your desired key.
Ok
Di
Fi
Gi
At
y
———6
D
E
F
A
O
O
O
O
O
O
O
O
TRANS-
JAZZ
FULL
HARPSI- VIBRA-
POSE
PIANO1
PIANO2
E.PIANO
ORGAN
ORGAN
CHORD
PHONE
(EXAMPLE 1) To change the key to E:
Press E.PIANO button.
(EXAMPLE 2) To change the key to F#:
Press JAZZ ORGAN and FULL ORGAN buttons
simultaneously.
You can see that each of the tone selector buttons lets you select a
different key. Using two tone selector buttons in combination lets you
select sharp or flat keys.
When the digital piano is transposed to a key other than C, the LED
above the TRANSPOSE button lights. When you return to the key of
C, the transpose light will go off.
(3) If you forget what key is currently set on the MR120, press the
TRANSPOSE button to light the LED of selected key.
(EXAMPLE)
If you press the TRANSPOSE button while the MR120
is in the key of F, the LED above the JAZZ ORGAN
button will light.
«Note: When the MR120's power is first turned on, the key of C is
always set.
Advertisement
