D
A
Warning
Wrench D may only be used by specialised workshop technicians, as
indicated on label C on the tool bag.
●
Remove the rubber protection cap E.
●
Place wrench
D
in the manual release device housing F.
●
To perform the emergency release, turn wrench
quarter turn.
B
If the electrical system allows it, check that the letter "N" appears on
the gearbox display by activating the instrument panel. The following
message will appear on the left TFT display: "Gearbox not in Parking
position". At the same time, an audible signal is repeated four times to
indicate that it has been released.
D
clockwise for a
E
Towing the vehicle
3
F
47