Ferrari 812 competizione A 2024 Owner's Manual page 26

Table of Contents

Advertisement

When "Automatic" mode is enabled, the word "auto" appears on the
gearbox display.
To exit "Automatic" mode, move the central lever of the gearbox selector
until A on the gearbox selector and AUTO on the gearbox display go out.
When "Automatic" mode is selected, the system automatically shifts
UP and DOWN in relation to vehicle speed, engine speed and the
torque/power requested by the driver.
When in "Automatic" mode, you can still manually shift gears using the
UP and DOWN paddles. The gearbox will remain in "Automatic" mode
and the word "auto" will remain on the gearbox display in flashing mode
when the paddles are used.
When the vehicle is stationary, a "N", 1st gear or "R" request will not
result in a change from "Automatic" to "Manual".
"Auto easy exit" mode
At each KEY-ON, the vehicle starts up in "Auto easy exit" mode unless
it was in "Automatic" or "Manual" mode when the engine was turned off.
In this case, at the next KEY-ON, it remains in the mode it was in before
KEY-OFF.
Moving the vehicle
26
Activation of the "Auto easy exit" mode is signalled by the word "auto"
and an arrow in the gearbox display area.
In this mode, the system will automatically UP-shift and DOWN-shift
according to vehicle speed, engine revs and the torque/power request of
the driver.
To exit "Auto easy exit" mode and switch to "Manual" mode, simply
use the UP or DOWN paddle (while the vehicle is moving) or (when the
vehicle is stationary) pull the central lever of the gearbox selector towards
M and release it: the M will turn red and the word "auto" will no longer be
displayed on the gearbox display.
If, on the other hand, you want to set the "Automatic" mode, push the
central lever of the gearbox selector towards A as stated above. The
system will implement "Automatic" mode in full.
"N" (Neutral) request
With the engine running, pull both the UP and DOWN paddles towards
the steering wheel at the same time without pressing the brake pedal to
request neutral "N". If necessary, "N" can be requested at any speed.
Subsequently, if an "UP" or "DOWN" shift is requested in the driving
modes that the gearbox is used in, the system will engage the gear most
suited to the speed of the vehicle.
During prolonged stops with the engine running, we recommend putting
the vehicle into "N" (neutral).
Important note
If you allow the vehicle to move forward in "N", when "UP" or
"DOWN" is requested, a gear will be engaged that corresponds to the
speed of the vehicle.

Advertisement

Table of Contents
loading

Table of Contents