4. Technical Specifications
4.6 Parameters of I/O Ports
Electrical characteristics of the digital input are in Table 17. Status of the digital input is reported in the
GUI on General Status page or can be retrieved in the Shell via io get bin0 command.
get command output
0
1
The maximum digital output load is 100 mA at 9 – 48 V.
4.7 Parameters of Serial Interfaces
Supported parameters of the RS232 and RS485 interfaces, which can be configured in Expansion Port
1 resp. Expansion Port 2 menu items, are in Table 18.
ICR-2432 Hardware Manual
Voltage
0.8 V (0.5 mA))
2 V
Table 17: Electrical Characteristics of Digital Input
Parameter
Description
Baudrate
300, 600, 1200, 2400, 4800,
9600, 19200, 38400, 57600,
115200, 230400.
Data Bits
5, 6, 7, 8.
Parity
none, even, odd.
Stop Bits
1, 2.
Flow Control
none, hardware.
Table 18: Parameters of Serial Interfaces
4.6 Parameters of I/O Ports
Web interface status
On
Off
29