4.6 Parameters of I/O Ports
Electrical characteristics of the binary input are in Table 16. Status of the binary input is
reported in the GUI on General Status page or can be retrieved in the Shell via io get bin0
command.
get command output
0
1
Table 16: Electrical Characteristics of Binary Input
The maximum binary output load is 100 mA at 9 – 48 V.
4.7 Parameters of Serial Interfaces
Supported parameters of the RS232 and RS485 interfaces, which can be configured in
Expansion Port 1 resp. Expansion Port 2 menu items, are in Table 17.
Parameter
Baudrate
Data Bits
Parity
Stop Bits
Flow Control
Voltage
0.8 V (0.5 mA))
2 V
Description
300, 600, 1200, 2400, 4800,
9600, 19200, 38400, 57600,
115200, 230400.
5, 6, 7, 8.
none, even, odd.
1, 2.
none, hardware.
Table 17: Parameters of Serial Interfaces
29
ICR-2436
Web interface status
On
Off