Advertisement
Available languages
Available languages
English
Getting started
Connect your product to the
mains or plug the power
cable into the wall socket.
Before you can use your light
source you'll need to pair it
with a steering device.
1. Make sure that your light
source is installed and
the main power switch is
turned on.
2. Hold the steering device
close to the light source
you want to add (no more
than 5 cm away).
3. Press and hold the pairing
button for at least 10
seconds. A red light will
shine steadily on the
steering device. Your light
source will begin to dim
and finally flash one time
to indicate that it has been
successfully paired.
Up to 10 light sources can be
paired with 1 steering device.
Make sure to pair them one
at a time. If the light sources
are close to each other,
4
disconnect those that have
already been paired from the
main power switch.
With the remote control you
can switch between 9 colours
and white lights. With the
IKEA smart hub and the IKEA
Home smart app, you get a
total of 20 colours and white
lights.
Getting started with
DIRIGERA hub
Download the IKEA
Home smart app and
follow the instructions on
screen. For Apple devices,
download the app using
the App Store. For Android
devices, download the app
using Google Play store.
CAUTION:
DO NOT USE WITH
STANDARD DIMMERS. This
light source will not operate
properly when connected to
a standard (incandescent)
dimmer or dimming control.
Only controllable by IKEA
Smart lighting products.
Advertisement
