Advertisement
Quick Links
Cal. 0S10 Instruction manual
CHRONOGRAPH FUNCTION: CENTER CHRONOGRAPH SECOND HAND 1/1 sec.
Timing up to 11 hours 59 minutes 59 seconds
A) DISPLAYS AND BUTTONS
B) SETTING THE TIME
C) SETTING THE DATE
D) USING THE CHRONOGRAPH
E) CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY)
A) DISPLAYS AND BUTTONS
Chronograph
Chronograph
Button
Hour hand
Minute
1st position
2nd
Nomal crown
Calenda
Chronograp
Button
Small Second
B) SETTING THE TIME
1. Pull the crown out to the 2nd position.
2. Turn the crown to set hour and minute hands.
3. When the crown is pushed back to the normal position, small second hand begins to run.
1/3
Advertisement
Related Manuals for Citizen 0S10
Summary of Contents for Citizen 0S10
- Page 1 Cal. 0S10 Instruction manual CHRONOGRAPH FUNCTION: CENTER CHRONOGRAPH SECOND HAND 1/1 sec. Timing up to 11 hours 59 minutes 59 seconds A) DISPLAYS AND BUTTONS B) SETTING THE TIME C) SETTING THE DATE D) USING THE CHRONOGRAPH E) CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY)
- Page 2 C) SETTING THE DATE 1. Pull the crown out to the 1st position. 2. Turn the crown counter-clockwise to set the date. *If the date is set between the hours of around 9:00 PM and 1:00 AM, the date may not change on the following day. 3.
- Page 3 E) CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY) This procedure shoud be performed when the chronograph second hand does not return to zero position after the chronograph has been reset, and including after the battery has been replaced. 1. Pull the crown out to the 2nd position. 2.
Need help?
Do you have a question about the 0S10 and is the answer not in the manual?
Questions and answers