Summary of Contents for Milwaukee M18 FUEL ONEFMTIW2FC12
Page 1
OPERATOR'S MANUAL Cat. No. M18 ONEFMTIW2FC12, M18 ONEFMTIW2PC12 M18 FUEL™ CONTROLLED MID-TORQUE IMPACT WRENCHES WARNING To reduce the risk of injury, user must read and understand operator's manual.
GENERAL POWER TOOL • Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left SAFETY WARNINGS attached to a rotating part of the power tool may Read all safety warnings, instruc- WARNING result in personal injury.
Page 3
Maintain labels and nameplates. These carry Do not use a battery pack or tool that is • important information. If unreadable or missing, damaged or modified. Damaged or modified contact a MILWAUKEE service facility for a ® batteries may exhibit unpredictable behaviour replacement.
IPM.............. 0-3,000 2. Use only the appropriate size Square Drive Recommended Sockets. Lanyard.... MILWAUKEE Energy Absorbing ® 3. To attach a socket, align the hole in the FUNCTIONAL DESCRIPTION accessory with the detent pin on the anvil. Hold the detent pin in while pushing the socket onto the anvil.
Page 5
Using the Control Switch ONE-KEY™ Enabled Modes The control switch may be set to three positions: Scan the QR code below and WARNING forward, reverse and lock. Due to a lockout read instructions, mechanism, the control switch can only be adjusted illustrations, and specifications for each of the when the ON/OFF switch is not pressed.
Return the tool, battery pack, and charger to a MILWAUKEE service facility for ® repair. If the tool does not start or operate at full power with a fully charged battery pack, clean the contacts on the battery pack.
Page 8
Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE ® prides itself in producing a premium quality product that is Nothing But Heavy Duty Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE ®...