Toro Flex-Force Power System 86910 Operator's Manual page 2

Introduction
This battery charger is intended to be used by residential homeowners.
This charger is designed to charge only Flex-Force 60V lithium-ion battery
packs. It is not designed to charge any other batteries. Using this product
for purposes other than its intended use could prove dangerous to you
and bystanders.
Read this information carefully to learn how to operate and maintain
your product properly and to avoid injury and product damage. You are
responsible for operating the product properly and safely.
Whenever you need service, genuine parts, or additional information,
contact an Authorized Service Dealer or distributor, or the tool
manufacturer's Customer Service, and have the model and serial numbers
of your product ready.
serial numbers on the product. Write the numbers in the space provided.
Important:
With your mobile device, you can scan the QR code
on the serial number decal (if equipped) to access warranty, parts,
Operator's Manuals, and other product information.
1. Model and serial number location.
Model No.
Serial No.
Original Instructions (EN)
Figure 1 identifies the location of the model and
Figure 1
All Rights Reserved
Printed in China
*3466-655*
g400718