Use Of Product Accessories - Beko BBVM17400B User Manual

Cross-partition sheet
It is used to divide the cooking section into
two separate sections.

3.5 Use of Product Accessories

Cooking shelves
There are 5 levels of shelf position in the
cooking area. You can also see the order of
the shelves in the numbers on the front
frame of the oven.
Placement of the cross-partition sheet
In order to cook only in the upper, lower or
together in the lower and upper sections in
your oven, place the cross-partition sheet
as shown in the following figure on the 3.
rack position.
Before placing the cross-partition
sheet 3, seat it on the end of the
rack evenly and then place it into
the oven firmly. If you place it at an
angled position, cross-partition
sheet shall be damaged.
Placing the wire grill on the cooking
shelves
It is crucial to place the wire grill on the
wire side shelves properly. While placing
the wire grill on the desired shelf, the open
section must be on the front. For better
cooking, the wire grill must be secured on
the wire shelf's stopping point. It must not
pass over the stopping point to contact
with the rear wall of the oven.
Placing the tray on the cooking shelves
It is also crucial to place the trays on the
wire side shelves properly. While placing
the tray on the desired shelf, its side de-
signed for holding must be on the front. For
better cooking, the tray must be secured on
the stopping socket on the wire shelf. It
must not pass over the stopping socket to
contact with the rear wall of the oven.
EN / 17
EN
PL