Download Print this page

Panamax PF Power MAX IN-WALL MIW-SURGE-1 Installation Instructions

Single gang surge protection

Advertisement

Quick Links

INSTALLATION INSTRUCTIONS
MIW-SURGE-1 G
MAX IN-WALL
TM
SINGLE GANG SURGE PROTECTION
Features:
• Fits most standard single-gang plastic or metal box.
• Uses standard wiring device screw-hole.
• Mounting Y o k e . - - - - - - - - - "
Designed to mount to any standard outlet box.
• Decora Faceplate Interface _ _ _ _ _ _ _ _ ..,.
This piece surrounds the receptacles and fits within
a standard cover plates Decora cutout.
• Bi-color Indicator
LED.------~
Green = Power On
Red =·Line Fault
• Mounting Screws. Two (2) 6-32 x . 75" pan head
screws are pre-installed, with retention features,
to mount the unit to ari outlet box.
• Both Outlets with Protect-or Disconnect Circuitry.
Caution, Before You Begin:
To avoid electrical shock or serious injury turn OFF all
power leading to your installation of MIW-SURGE-1 G such as circuit breaker or switch.
Mounting:
1. Wire nuts (included) are used to connect the three 6 inch
MIW-S.URGE-1 G wires. Connect the black (HOT) wire to the black
wire from the wall outlet, white (NEUTRAL) to white and the
green (GROUND) wire to the (typically bare) ground wire.
3 Wire nuts
included
~~
2. The MIW-SURGE-1 G is then installed in the outlet box just like any duplex
receptacle or switch by driving the pre-attached screws into the outlet box.
3.
Outlet box compatibility. This product is designed
to fit into most standard metal or plastic outlet boxes.
800-472-5555 • www.panamax.com • www.furmansound.com
INS00885-A

Advertisement

loading