Problem
The appliance
produces a strange
smell.
The appliance is
too loud.
The appliance still
indicates that I
need to replace a
filter, but I already
did.
Can I switch off the
Wi-Fi feature on
my appliance?
What do the codes
on my appliance
mean ?
No airflow or
airflow is very
weak from the
circulation air
outlet.
Possible solution
The first few times you use the appliance, it may produce a
•
plastic smell. This is normal.
If the appliance produces a burning smell, immediately
•
unplug it. Please contact your Philips dealer or an
authorized Philips service center.
The filter may produce an odor after being used for a
•
while because of the absorption of indoor gases. It's
recommended that you reactivate the filter by putting it
in direct sunlight for repeated use. If the odor remains,
replace the filter.
The noise level is higher if you select high speed. Please
•
change to a lower speed mode.
If there is an abnormal sound,contact the Consumer Care
•
Center in your country.
Perhaps you did not reset the filter lifetime counter. Switch
•
on the appliance. Then press and hold
3 seconds.
Wi-Fi is a key feature of your appliance. For this reason, it
•
cannot be switched off manually. Please note the Wi-Fi
feature will be switched off automatically if your appliance
is not connected within 15 minutes of powering on the
device, after plugging the cable in for the first time. Long
press
button on the appliance for 7 seconds to
re-activate the pairing mode.
Error code "E1" displays on the screen. The motor has
•
malfunctioned. Contact the Consumer Care Center in your
country.
Check if the appliance is on fan function.
•
Check if any objects are stuck around the circulation air
•
outlet.
and
for
EN
19