Page 2
Put the crate in a large, open area so that you can regulations. Wallenstein Equipment does not access the machine components from all sides accept responsibility for the use of unsafe during assembly.
Page 3
WXT15H / WXT20H Setup Instructions Log Splitter WXT15H WXT20H The assembly hardware is inside the Operator's Manual storage tube.
WXT15H / WXT20H Setup Instructions Log Splitter Pre-delivery Inspection Checklist Do the following pre-delivery inspections (PDI). All support stands move freely. Machine controls function correctly. All fasteners are torqued to the correct specifications. All grease points are lubricated. Purchased accessories are included, if applicable.
WXT15H / WXT20H Setup Instructions Log Splitter Specifications Bolt Torque IMPORTANT! If you replace hardware, use fasteners Imperial Bolt Torque Specifications of the same grade. Torque Bolt SAE Gr. 2 SAE Gr. 5 SAE Gr. 8 Diameter IMPORTANT! The torque specifications in these lbf•ft...
WXT15H / WXT20H Setup Instructions Log Splitter Lug Nut Torque WARNING! Lug Nut Torque Specifications Wheel Wheel lug nuts must be installed and kept at size Units First stage Second stage Third stage the correct torque to prevent loose wheels, 8 inch lbf•ft...