This manual covers the Wallenstein WX350 and Keep this manual with the machine at all times. WX360 vertical-mounted, 3-point hitch wood splitters. W034 Model Variants Covered in this Manual •...
WX350, WX360 Introduction 3-point Hitch Wood Splitter Delivery Inspection Report WALLENSTEIN WX350, WX360 Three-point Hitch Wood Splitters To activate warranty, register your product online at http://www.wallensteinequipment.com _________________________________________ Pre-delivery Inspection Customer’s Name Inspect for damage from shipping. Immediately contact the shipping company if damage is found.
Serial Number in the spaces provided below. Always provide the model and serial number of your Wallenstein product when ordering parts, or requesting service or other information. The product information plate location is shown in the illustrations on the following pages.
When getting familiar with the Wallenstein product, Manufactured by: notice that there are numerous decals located on the Wallenstein Equipment Inc., 7201 Line 86, Wallenstein ON N0B2S0, Canada MODEL: ########## TYPE OF VEHICLE/TYPE DE VEHICLE: machine. There are different types of decals for safety,...
ATTENTION! BE ALERT! YOUR SAFETY IS INVOLVED! The Safety Alert Symbol identifies important safety messages on the Wallenstein wood splitter and in the manual. When you see this symbol, be alert to the possibility of personal injury or death. Follow the instructions in the safety message.
- Heavy work gloves • Accidents Can Be Avoided - Protective shoes with slip resistant soles The policy of Wallenstein Equipment Inc. is to produce • DO have a first-aid kit available products that are safe and reliable. However, even...
WX350, WX360 Safety 3-point Hitch Wood Splitter Equipment Safety Guidelines bystanders to possible serious injury or death. If elderly people are assisting with the work, their Always place the machine in a Safe Condition before physical limitations need to be recognized and performing any service work, maintenance procedures, accommodated.
WX350, WX360 Safety 3-point Hitch Wood Splitter Be Prepared 1. Determine where the split wood is going to be piled ahead of time. Make sure it does not interfere with safe loading of wood into the splitter. 2. Precut logs so wood is ready to load into the splitter.
Page 11
WX350, WX360 Safety 3-point Hitch Wood Splitter 2.8.1 Sign-Off Form The design and manufacture of this product conforms to relative provisions in the following standards: Anyone using this machine must read and thoroughly understand all Safety, Operation and Maintenance ISO 4254-1 Agricultural machinery – Safety information in this manual.
WX350, WX360 Safety Signs 3-point Hitch Wood Splitter Safety Sign Explanations 1. Warning! Always wear appropriate Personal Protective Equipment when using this machine. For example: • A hard hat • Heavy gloves • Hearing protection • Protective shoes with slip resistant soles •...
WX350, WX360 Familiarization 3-point Hitch Wood Splitter 4. Familiarization 4.1.1 Training To the New Operator Each operator must be trained in the proper set-up and It is the responsibility of the owner or operator to operating procedures before using the machine.
WX350, WX360 Controls 3-point Hitch Wood Splitter 5. Controls Hydraulic Valve The control valve extends and retracts the wedge to split the wood. The lever on the valve has three positions—Extend, Neutral, and Retract. 00731 Fig. 5 – Extend Wedge to split Wood Neutral Position •...
WX350, WX360 Controls 3-point Hitch Wood Splitter Stroke Limiter Accessory Retract • Push the lever up to retract the wedge. The valve The Stroke Limiter accessory improves productivity detent holds the lever in Retract allowing a hands- when splitting shorter pieces. It stops the cylinder from free return cycle.
WX350, WX360 Operating Instructions 3-point Hitch Wood Splitter 6. Operating Instructions The operator is responsible to be familiar with and 1. On the tractor, place the 3-point hitch lift arms in follow all operating and safety procedures. their full sway position, then reverse the tractor up to the splitter.
WX350, WX360 Operating Instructions 3-point Hitch Wood Splitter If not already done, level the splitter from side to side using the lift arm jackscrew arm and the top link turnbuckle. The splitter frame should always be vertical during operation. 00738 Fig.
WX350, WX360 Operating Instructions 3-point Hitch Wood Splitter Before Start up 7. To unhook from the tractor, reverse the above procedure. Always park the machine in a dry, level area. 1. Clear the area of bystanders, especially small children. Operating Safety 2.
3-point Hitch Wood Splitter Splitting Logs 6.4.1 Pre-operation Checklist Efficient and safe operation of the Wallenstein IMPORTANT! Park the wood splitter on a level, wood splitter requires that each operator reads and dry work area free of debris and other objects.
WX350, WX360 Operating Instructions 3-point Hitch Wood Splitter IMPORTANT! Do not hold the valve lever to extend or retract the cylinder once it has reached the end of its stroke. Doing so can overheat the oil. Always keep the working area neat and clean to prevent tripping.
WX350, WX360 Storing the Wood Splitter 3-point Hitch Wood Splitter 7. Storing the Wood Splitter Transporting 6.7.1 Transport Safety After the season's use and the wood splitter is going to be put away in storage, it should be thoroughly 1. Comply with local laws governing safety and inspected and prepared.
6. Where replacement parts are necessary, use only OEM parts to restore your equipment to original specifications. Wallenstein Equipment is not responsible for injuries or damages caused by use of unapproved parts or accessories. 00739 7.
The following table lists some problems that may be encountered, with possible causes and solutions. If a problem persists after reading through the Troubleshooting section, contact the local dealer, distributor or Wallenstein Equipment. Have the machine serial number ready. Problem Cause Solution Oil filter plugged.
WX350, WX360 Specifications 3-point Hitch Wood Splitter 10. Specifications 10.1 Machine Specifications Model WX350 WX360 3-point Hitch Mounted Mounting 4" x 24" 5" x 24" Splitter Cylinder (102 mm x 609 mm) (127 mm x 609 mm) Bore x Stroke Splitting Force @ 2550 psi...
WX350, WX360 Specifications 3-point Hitch Wood Splitter 10.2 Common Bolt Torque Values Checking Bolt Torque Imperial Bolt Torque Specifi cations The tables shown give correct torque values for Torque Value various bolts and capscrews. Tighten all bolts to Bolt the torque values specified in the table, unless SAE Gr.
3-point Hitch Wood Splitter 11. Warranty LIMITED WARRANTY Wallenstein products are warranted to be free of defects in materials and workmanship under normal use and service, for a period of Five Years for Consumer Use Two Years for Commercial/Rental Use from the date of purchase, when operated and maintained in accordance with the operating and maintenance instructions supplied with the unit.
Need help?
Do you have a question about the WX350 and is the answer not in the manual?
Questions and answers