Yamaha YZF690 Owner's Manual page 28

Instrument and control functions
TIP
When the temperature is over 51°C or
below –9 °C, "_ _" will be displayed.
Display brightness and shift timing
indicator light settings mode
4
The following settings can be adjusted
in order:
 Display brightness
 Shift timing indicator light ON /
FLASH / OFF
 Shift timing indicator light ON
r/min
 Shift timing indicator light OFF
r/min
 Shift timing indicator light bright-
ness
To access the settings mode
1. Turn the vehicle off.
2. Hold the "SEL" switch, turn the
vehicle on and continue holding
the "SEL" switch until the display
changes to the display brightness
control mode.
3. Use the "RES" switch to change
the setting values.
4. Push the "SEL" switch to confirm
the selected setting value and cy-
cle to the next setting in the order
listed above.
TIP
EAU93241
The settings mode will exit after all set-
tings are confirmed.
Display brightness
1. Display brightness
An brightness level indicator bar will
appear at the bottom of the display.
Use the "RES" switch to select the de-
sired brightness level and push the
"SEL" to confirm it.
4-10
Shift timing indicator light
The shift timing indicator light has 3
settings:
 ON setting: the shift timing indica-
 FLASH setting: the shift timing in-
1
 OFF setting: the shift timing indi-
tor light will come on when the set
engine speed is reached. When
this setting is selected, the indica-
tor light will come on and stay on
until the next setting is selected
using the "RES" switch or con-
firmed with the "SEL" switch.
dicator light will flash when the set
engine speed is reached. When
this setting is selected, the shift
timing indicator light will flash 4
times per second until the next
setting is selected using the "RES"
switch or confirmed with the
"SEL" switch.
cator light is deactivated. When
this setting is selected, the shift
timing indicator light will flash
once every 2 seconds until the
next setting is selected using the
"RES" switch or confirmed with
the "SEL" switch.