Yamaha YZF690 Owner's Manual page 26

Instrument and control functions
Odometer
The odometer shows the total distance
traveled by the vehicle.
TIP
The odometer will lock at "999999"
and cannot be reset.
4
Tripmeters
The tripmeters show the distance trav-
eled since they were last reset.
To reset a tripmeter, change the dis-
play to the tripmeter you want to reset,
and then hold the "RES" switch until it
is reset.
TIP
The tripmeters will reset and continue
counting after 9999.9 is reached.
Fuel reserve tripmeter
If the last segment of the fuel meter
starts flashing, the display automati-
cally changes to the fuel reserve trip-
meter "TRIP F" and starts counting the
distance traveled from that point.
To reset the fuel reserve tripmeter,
EAU86891
change the display to the fuel reserve
tripmeter, and then hold the "RES"
switch until it is reset.
TIP
If you do not reset the fuel reserve trip-
meter manually, it will reset automati-
cally and disappear from the display
EAU89142
after refueling and traveling 5 km (3 mi).
Instantaneous
display
EAU89152
1. Instantaneous fuel consumption display
This display shows the fuel consump-
tion under the current riding condi-
tions. It can be set to either "km/L" or
"L/100 km", or "MPG" when using
miles. To switch the fuel consumption
measurement units, hold the "SEL"
switch until the measurement units
change.
 "km/L": the distance that can be
 "L/100 km": the amount of fuel
 "MPG": the distance that can be
TIP
When traveling under 10 km/h (6 mi/h),
EAU89181
fuel consumption
"- -.-" is displayed.
TIP
The instantaneous fuel consumption
function should be used for general
reference only. Do not use this figure to
estimate the distance that can be trav-
eled on the current tank of fuel.
1
4-8
traveled on 1.0 L of fuel.
necessary to travel 100 km.
traveled on 1.0 Imp.gal of fuel.
EAU87790