Table of Contents
Advertisement
Heathkit
START >
Ly
NOTE: When you install each of the
Yj
next two capacitors, insert the leads,
lay the capacitor flat against the board
in the outline, and solder the leads
to the foil.
(| ) C117: .47 wF Mylar.
(| ) C116: .047 wF Mylar.
IDENTIFICATION
DRAWING
(| ) C113: 10 pF ceramic.
(| ) C114: 330 pF ceramic.
holes.
(| ) C102: .05 pF ceramic.
le hGhlocimeeaias
CTE
) C119: .05 pF ceramic.
( ) C109: .1 pF polystyrene.
) C118: 510 pF ceramic. Lay this
capacitor against the board.
) C111:
carbon.
( ) C107: 1.0 pF Mylar.
( ) C101: 100 pF electrolytic.
( ) C105: .05 pF ceramic.
( ) C112:
1.0 «F electrolytic.
Lay
this capacitor against the board.
( ) C106: .001 pF (1000 pF) poly-
styrene.
IDENTIFIED
IDENTIFIED
LEAD
IS
LEAD
IS
NEGATIVE
(-)
POSITIVE
(+)
POSITIVE
+IMARK
(+)
l
( ) C104: 1.0 pF electrolytic.
( ) C103:
10 pF, 35 V electrolytic.
NOTE:
Do
not
confuse
this
capacitor
with
the
10 pF NP
(non-polarized).
( ) Solder the leads to the foil and
cut off the excess lead lengths.
Advertisement
Table of Contents
