Table of Contents
Advertisement
4
5
6
The AP-677 and AP-679 are the same in physical appearance. They have different antenna patterns. For details
on the antenna patterns, refer to the 670 Series data sheet.
LED
The 670 Series access point is equipped with one LED that indicates the system status of the access
point.
Table 3: LED Meanings during Boot Up
Color /State
Off
Red
Flashing - Green
On - Green
Green - Yellow, 6 seconds period
Green - Flashing
1
Red - Flashing
2
1. Mostly off (off 6 seconds, then one blink flash).
2. Equally off/on (off 1 second, then red 1 second).
Table 4: LED Meanings during Operation
Color/State
Solid Red
One red blink every 3 seconds
Two red quick blink off 0.5 seconds apart cycled every 3
seconds
Three red quick blink off 0.5 seconds apart cycled every 3
seconds
HPE Aruba Networking 670 Series Outdoor Access Points | Installation Guide
USB-C Interface
E1 Port (SFP)
USB-C Console Port, Reset Button, and LED
Meaning
No power to AP
Initial power-up
AP booting, not ready
AP ready. GbE (or better) or SFP connected. The
LED turns off after 1200 seconds.
AP ready. 100Mbps connected. The LED turns
off after 1200 seconds.
AP in deep sleep
AP in thermal shutdown
Meaning
General fault - Immediate attention required
Radio 0 fault (5 GHz)
Radio 1 fault (2.4 GHz)
Radio 2 fault (6 GHz)
8
Advertisement
Table of Contents
