Table of Contents
Advertisement
BABT Declared
Host Combinations
Regulatory
Compliance
Statements
Current Draw
Environment
The Dual PRI NAC is designed only for use in the following Total Control
chassis by 3Com:
Enterprise Network Hub/16 35/45 Amp with AC or DC PSU
Enterprise Network Hub/16 70/130 Amp with AC or DC PSU
Enterprise Network Hub/6 with AC PSU
Use of a chassis other than one of the above may result in a hazard and
will invalidate the regulatory approval.
United States
FCC Part 15 Compliance Statement
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
+5.2 vDC @ 1.5 A typical maximum
Typical maximum refers to the maximum current draw under most typical
configurations.
Shipping and Storage
Temperature:
Humidity:
Operating
Temperature:
Humidity:
°
-25 to 75
C, -13 to 167
0 to 100%, Non-condensing
°
°
0 to 40
C, 32 to 104
F
0 to 95%, Non-condensing
Technical Specifications
°
F
A-3
Advertisement
Table of Contents
