Specifications; Operation - Ego Power+ NEXUS ESCAPE PAD1800E Operator's Manual

◾
Do not expose the battery pack to fire or excessive
temperature. Exposure to fire or temperature above
130°C may cause explosion.
◾
Do not expose the power inverter to rain or wet
conditions. Water entering the power inverter will
increase the risk of electric shock.
◾
The power inverter is not intended for any use other
than charging small (up to 4.2 Amp for two USB ports
combined) USB electronics or small (up to 150VA) AC
devices. Any other use may result in damage.
◾
Switch off the power inverter when not in use.
◾
Use only with the battery packs and chargers listed
below:
BATTERY PACKS
BA1400, BA2800,
BA4200, BA1400T,
BA2800T, BA4200T,
BA5600T, BA6720T
◾
Use the power inverter only with specifically
designated battery packs. Use of any other battery
packs may create a risk of injury and fire.
◾
Do not disassemble the power inverter, take it to a
qualified service person when service or repair is
required. Incorrect reassembly may result in a risk of
fire or electric shock.
◾
Have your power inverter serviced by a qualified
repairperson using only identical replacement parts.
◾
This will ensure that the safety of the power inverter
is maintained.
◾
Save these instructions. Refer to them frequently and
use them to instruct others who may use this tool. If
you lend this tool to someone else, also lend these
instructions to them to prevent misuse of the product
and possible injury.
◾
Only for class II appliance.

SPECIFICATIONS

Input
Output Wave Form
Range of rated values 37.8 - 58.8V
USB-A Output
USB-C Port
(Output)
4
56 VOLT POWER INVERTER — PAD1800E
CHARGERS
CH2100E, CH5500E, CH7000E
56 V
Pure Sine Wave
5 V 2.4 A, 12 VA Max
5 V 3 A, 9 V 3 A,
12 V 3 A, 15 V 5 A,
100 VA Max
AC Output (Recep-
tacle)
Weight
(Without battery pack)
Recommended
Ambient Temperature
Range for Operation
Recommended
Ambient Temperature
Range for Storage
DESCRIPTION
KNOW YOUR INVERTER (Fig. A)
1. Power Button
2. Handle
3. LED Button
4. LED light
5. USB-C Port
6. USB-A Port
7. AC Output Port
8. Electric Contacts
9. Latch

OPERATION

WARNING:
To reduce the risk of electric shock
connect only one electrical equipment to the socket
outlet.
APPLICATIONS
You may use this product for the purposes listed below:
◾
Supplying power for small AC devices via AC output
port.
◾
Supplying power for compatible small USB electronics
via USB-A or USB-C output ports.
◾
Providing light in low light conditions or serve as an
emergency light beacon.
INSTALLING/REMOVING BATTERY PACK (Fig. B)
Fully charge the battery pack before first use.
To attach
Align the mounting slots on the power inverter with the ribs
on the battery pack, then move the power inverter towards
the battery pack until it snaps into position.
220-240 V ~ 50 Hz, 180 VA
Continuous, 250 VA Peak more
than 3 seconds
0.68 kg
5°C - 40°C
-20°C - 70°C