Keeping the charger connected to the phone when the
battery is fully charged will not damage the battery.
The only way to turn off the charger is to disconnect it,
so use an easily accessible AC well outlet. You can
connect the charger to an IT supply (Belgium only).
Switch on the phone
)
1.
Long press
to switch on the phone. If
"Please insert SIM card" appears on the screen, it
means that your SIM card has not been inserted
correctly. Please check whether the SIM card has
been inserted correctly and is valid.
2.
Enter the PIN code if required (i.e. the 4 to 8-
digit security code of your SIM card). It is
preconfigured and communicated to you by
your operator or retailer. To personalise the PIN
code, see page 64.
If you enter an incorrect PIN code 3 times in
succession, your SIM card will be blocked. To unblock
it, you must obtain the PUK code from your operator.
Getting started
Set date and time
When you switch on your phone for the first time,
you will be prompted to set the date and time. Use the
alphanumeric keypad to enter numbers.
For complete date and time options, see page 59.
Calibration
This feature allows you to calibrate your screen, in
order to achieve better precision when using it with
the stylus pen. You must tap all three "+" signs one
after another to complete the process.
Copy the SIM phonebook
When the mobile phone detects a SIM card that
already contain names, you will be prompted with a
message to copy your SIM phonebook onto the built-
)
in phonebook. Press
accept.
,
to cancel or press
11
to