Copy The Sim Phonebook; Charge The Battery; Switch On The Phone - Philips 568 User Manual

Hide thumbs Also See for 568:

Table of Contents

Replace the back cover by sliding it into its slots,

until it stops, then remove the protective film

covering the screen and the camera lens before

using the phone.

To switch on the phone, press the

PIN code if required (i.e. the 4 to 8-digit secret code

of your SIM card). It is preconfigured and

communicated to you by your operator or retailer. To

personalise the PIN code, see page 43.

)

key. Enter the

If you enter a wrong PIN code 3 times, your SIM card

is blocked. To unblock it, you must request the PUK

code from your operator.

Copy the SIM phonebook

The mobile phone detects a SIM card that already

contains names and a message asks you if you want to

copy your SIM phonebook onto the built-in

phonebook. Press

For complete information about phonebooks, see

"Contacts" page 16.

Your phone is powered by a rechargeable battery. A

new battery is partially charged and an alarm will warn

you when the battery reaches low.

You may lose all your personal settings if you remove

the battery when the phone is switched on.

Once the battery and battery cover are clipped

on the phone, plug the connector of the charger

(supplied with the phone, in the box) into the

socket at the base of the phone on one end, then

to refuse or

to accept.

Getting started

Table of Contents