Charge The Battery - Philips CT7668-BWUAS0P1 Manual

4. Replace the back cover of your phone: slide it
upwards until it locks into place.
5. Remove the protective film covering the screen
before using the phone.

Charge the battery

Your phone is powered by a rechargeable battery. A
new battery is partially charged and an alarm will warn
you when the battery reaches low. If the battery is
completely flat, it will take 2 or 3 minutes of charging
for its icon to reappear.
You may lose all your personal settings if you remove
the battery when the phone is switched on.
1. Make sure that the battery and battery cover are
attached to the phone.
10
2. Pull away the protective rubber cap covering the
sockets at the base of phone (it is attached to the
phone so that you cannot lose it) and plug the
charger connector (supplied with the phone)
into the right socket, then plug the charger into
an AC wall outlet.
3. When charging (while the phone is switched
off ), an animation will be displayed on the main
display as well as the sub display of the phone.
When the battery is fully charged, the phone will
emit an alert tone and the LED indicator
changed from red to green. You can also charge
the battery when the phone is switched on.
4. When the battery is fully charged, disconnect
the charger from the AC wall outlet and the
phone.
Getting started