GE UCC15NPRBII Owner's Manual And Installation Instructions page 7

Controls
Appliance Communication
WiFi (for customers in the United States, its territories, and Canada)
• Available for iPhone from the Apple Store or from link at
GEAppliances.com.
• Available for Android from Google Play or from link at
GEAppliances.com.
Select Create Account on app.
• Enter information, and select Register. An e-mail will be
generated.
• When you receive the e-mail, select Verify Account.
the app to communicate with your icemaker.
Icemakers Models with Password Label:
Set up the app.
• Press the at the top of the screen.
• The info button will show a picture of the touch display on
the appliance. Select OK.
• Select Next.
Press WiFi Connect on the control. Press and hold Clean
and Filter buttons at the same time The WiFi symbol will
start flashing on the display.
• Select Next in the app.
Label.
Regulatory Information
FCC/IC Compliance Statement:
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received,
including interference that may cause undesired
operation.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will
49-1000640 Rev. 4
• Enter the password into the app.
Next.
module number can also be found on the label.
• Connect to the home WiFi network and type in the home
WiFi password.
Icemakers Models with UPD ID Label:
Press WiFi Connect on the control. Press and hold Clean
and Filter buttons at the same time. The WiFi symbol will
start flashing on the display.
Set up the app.
• Press the at the top of the screen.
Press Scan in app after that again.
• App will search for available WiFi Networks automatically.
• Select the home WiFi network and type in the home WiFi
password.
that says the device is connected, the device has been
successfully connected.
possible reasons why connection failed and the option to
retry.
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television
technician for help.
Labelling: Changes or modifications to this unit not
expressly approved by the manufacturer could void the
user's authority to operate the equipment.
7