Bromic Heating WATERBOY 7575170 Operation Manual

Congratulations on your purchase of your Bromic Waterboy
submersible cutter pump.
This manual contains essential information on the installation,
operation and maintenance of the pump. Please read it thoroughly
and follow these instructions in order to install and use the pump
correctly. Failure to follow these instructions may result in motor
overcharging and other malfunctions. Bromic is not liable should
instructions not have been followed.
Specification
1. Maximum operating depth 5m below water level;
2. Continuous duty when fluid temperature under +40°C;
3. Value of PH in fluid 4~10;
4. Maximum kinematic viscosity: 7xl0
5. Maximum density: l.2xIO
Technical data (the data will be some change under
different voltage and frequency)
Voltage /
Power Discharge
Model Frequency
Input (kw) (mm)
(V/hz)
7575170 1.5 50 220-240/50
Part View
270L CUTTER SUBMERSIBLE PUMP - 7575170
~23x10 m /s;
-7 -6 2
kg/m
3 3
Max Flow Max Head Weight Packing (cm)
(L/min) (m) (kg)
270 10 22 53x29.5x24.5
Performance Curve
Circuit Diagram
H x W x D
OPERATION MANUAL
12/2023 - V1.3