Table of Contents
Advertisement
9-9.
Put the wires into the terminal
box and install terminal box
cover.
9-10.
Reconnect power circuit breaker.
10. Rotate the upper duct as in the
picture.
11. Attach each magnet to the inner
surface of the upper duct cover
overlapping with the lower duct
cover, and assemble the upper
duct cover in a way that it fits the
mounting bracket.
WARNING
Installation with screws or brackets
other than those specified in the
instruction of this manual may result in
electrical hazards.
NOTE
Magnets are included in the accessory
box.
12. Assemble with 10 mm hood fixing
screws from both sides.
English 19
Advertisement
Table of Contents
