MAXDATA PRO 7000X Manual page 85

Possible cause of the problem: A software error has caused a system
crash.
Troubleshooting:
o Additional information is available in the operating system
handbook.
o If you cannot remedy the problem, then restart the system. You
will lose any unsaved data! If this doesn't work either, briefly
switch off
Warnings
Each time the system starts, it carries out a self-test (POST). If an error
occurs, an error message appears, briefly describing the problem. You
can find information on what to do next in the advanced service
handbook.
the computer and then switch it back on again.
Appendix B - Troubleshooting
85