FujiFilm instax mini 99 Quick Start Manual page 18

Handling
EN
■ Handling of the Camera
1. The camera is a precision instrument so do not get it
wet, drop it, or subject it to shock. Also, do not place
the camera where it will be exposed to sand or grit.
2. Do not use solvent such as paint thinner or alcohol
to wipe off dirt. Use a dry clean cloth.
3. Any dirt or dust in the film chamber will affect the
finish of the print. Do not allow the film chamber to
get dirty or dusty.
4. Do not leave the camera in a closed motor vehicle,
another hot place, a humid place, on the beach, etc.
for a long period of time.
5. Gas containing moth repellent may adversely affect
the camera and INSTAX MINI instant film. Avoid
keeping the camera and INSTAX MINI instant film in
a chest of drawers, etc. with mothballs.
6. The operating temperature range of this camera is
41°F (+5°C) to 104°F (+40°C).
7. When taking photos, please be careful not to violate
the rights of others, such as copyright, image rights,
and privacy, or violate public order. Any act that
violates the rights of others, or is contrary to public
order or morals, or constitutes a nuisance, is subject
to legal penalties and claims for damages.
8. This camera is for general household use. It is not
suitable for commercial photography and other
applications where a large number of prints are
desired.
9. Before using a commercially available strap, check
the strength of the strap. Be especially careful when
using a strap for mobile phones and Smartphones
because such straps are made for lightweight
devices. Use of the provided shoulder strap is
recommended.
10. If you are not using your camera for a period of time,
unload the battery and keep it where it will avoid
moisture, heat and dust.
11. Remove soil and dust from the viewfinder window,
etc. with an air blower and by wiping gently with a
piece of soft cloth.
18
■ Cautions During Printing
■ Handling of INSTAX MINI Instant Film and Photos
For details on the handling of film and photos, see
the instructions written on the FUJIFILM INSTAX MINI
instant film packaging.
1. Keep film in a cool place. In particular, do not leave
film in an extremely hot place, such as in a closed
motor vehicle, for a long period of time.
2. Do not make a hole in film or tear or cut film. Do not
use damaged film.
3. Use film as soon as possible after inserting it in the
camera.
4. If film has been kept in a place where the
temperature is extremely low or high, allow it to
become accustomed to a normal temperature
before taking photos.
5. Be sure to use the film before the expiration or "Use
Before" date on the instant film package.
6. Avoid checked luggage inspection at the airport
and other strong X-ray exposure. Unused film
is susceptible to the effect of fogging, etc. We
recommend that you carry film onto aircraft in carry-
on luggage (check with the relevant airport for more
information).
7. Avoid exposing instant photos to strong light, and
store them in a cool and dry place.
8. Do not cut, peel apart or puncture new or newly
used instant print film. Film contains a small amount
of highly caustic paste; paste can remain active up to
10 minutes after instant photo ejects. Be especially
careful not to let infants or pets put the film into
their mouth. Paste should not come into contact
with skin or clothes.
9. If you accidentally touch the paste of unused INSTAX
MINI instant print film, immediately wash it off with
plenty of water. If the paste comes into contact with
the eyes or mouth, wash the area and then seek
medical attention. The alkalinity of INSTAX MINI