TP-Link ER605W Installation Manual

Installation Guide
Omada AC1350 Gigabit VPN Router
Note: The image may differ from the actual product.
Hardware Overview
Front Panel
Indication
On: The router is powered.
Power Off: The router is powered off.
Slow Flashing: System is running normally.
Quick Flashing: The router is being reset.
System
On/Off: System is starting up or running abnormally.
On: 2.4 GHz wireless network is enabled.
Off: 2.4 GHz wireless network is disabled.
2.4 GHz Wi-Fi
On: 5 GHz wireless network is enabled.
5 GHz Wi-Fi Off: 5 GHz wireless network is disabled.
On: Running at 1000/100/10 Mbps, but no activity.
Port LED
Flashing: Running at 1000/100/10 Mbps, and transmitting or
receiving data.
Off: No device is connected to the corresponding port.
Hardware Connection
1 Connect the modem to the router's WAN Port 1 with an
Ethernet cable.
Note: To connect to the internet via another WAN port (port 2 or port 3),
configure your desired port to WAN, then connect the port to the
internet. Refer to FAQ-Q1 for more details.
2 Use the charger provided in the package to power on the
router.
Software Configuration
3
The router supports two configuration options:
Standalone Mode: Configure and manage the router by itself.
Controller Mode: Configure and manage network devices centrally. It is recommended in large-scale networks, which consist of a large number of Omada
wireless Routers and/or Omada devices such as access points, switches.
Note:
1. When the router is managed by a controller, configurations of the router will be overridden by the controller.
2. For the detailed configurations, refer to the User Guide of the router and the controller. The guides can be found on the download center of our official website:
https://www.tp-link.com/support/download/.
Option 1: Standalone Mode
Modem
Router
To ask questions, find answers, and communicate with TP-Link users or
engineers, please visit https://community.tp-link.com to join TP-Link
Community.
For technical support and other information, please visit
https://www.tp-link.com/support, or simply scan the QR code.
© 2023 TP-Link 7106510876 REV1.0.1
Back Panel
Description
Power Socket Connect to the power outlet via the provided power adapter.
WAN
Gigabit WAN port.
(Port 1)
Gigabit WAN/LAN port.
WAN/LAN
By default, it is a LAN port connecting to local PCs or switches.
(Port 2&3)
You can configure the port to a WAN port on the management page.
LAN
Gigabit LAN ports.
(Port 4&5)
Reset: Press and hold the button for 5 seconds, the system LED will
flash quickly, indicating the device is being reset to its factory default
settings.
3 Wait until the system LED flashes slowly and the Wi-Fi
LEDs turn solid, indicating the router is ready for setup.
Power System
On Slow Flashing
Wireless Internet Connection
Wired Internet Connection
2.4 GHz 5 GHz
On On