Drive Carrier Module; Removing A Drive Carrier Module - Gateway E-842R User Manual

Drive carrier module

Avoid contact with such things as backplane components and module connectors.

Removing a drive carrier module

To remove a drive carrier module:
1
2
3
26
CHAPTER 4: Troubleshooting
Caution
Observe all conventional ESD precautions when handling modules and components.
Release the carrier handle by pressing the latch in the handle towards the right. The
anti-tamper lock must be off.
Caution
Damage can occur to a drive if it is removed while still spinning. We
recommend that you perform all steps in the following procedure to ensure that the
drive has stopped prior to removal.
Gently withdraw the drive carrier module approximately 1 inch (25 mm) and wait 30 seconds
to let the drive spin down.
Withdraw the module from the drive bay.
Download from Www.Somanuals.com. All Manuals Search And Download.