Removing a battery module
To remove a battery module:
•
Installing a battery module
To install a battery module:
1
2
Removing and replacing a disk I/O module
To remove and replace a disk I/O module in an expansion enclosure, follow the procedures for
removing and replacing a controller module (see
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
Operate the release latch and slide the battery module out of the controller module.
Check for damage. Do not install if there are any outer signs of damage.
Slide the battery module into the vacant slot on the right side of the controller module until
it clicks into place.
"Controller module" on page
22).
25