Before First Use; Grill Position; A) Using An Automatic Program - TEFAL OptiGrill 4in1 XL Instructions For Use Manual

Hide thumbs Also See for OptiGrill 4in1 XL:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 3

BEFORE FIRST USE

1
3
4
8
1. Remove all packaging materials, stickers
and accessories from the inside and the
outside of the appliance. Additional colour
ring stickers are provided. You can stick your
preferred language on the original colour
ring.
2. Before using for the first time, thoroughly
clean the plates with warm water and a
little dishwashing liquid, rinse and dry
2
thoroughly.
3. Position the removable drip trays at the
front and at the back of the appliance.
4. Make sure that the upper and lower plates
are correctly positioned in the product. Do
not activate preheating without the plates.
Connect the appliance to the mains supply
(the cable must be completely unwound).
5. Press the on/off button.
Caution : Make sure there is no food
between the plates
5

1. GRILL POSITION

A) USING AN AUTOMATIC PROGRAM

12 automatic programs:
red meat, burger, sausage, pork, chicken, fish,
seafood, sandwich, pepper, eggplant, potatoes
and veggie steak.
1
3
5
1. If the food you wish to cook is frozen, press
the corresponding button.
This function is only available when
cooking with the automatic programs,
not in manual mode.
2. Select the appropriate cooking program
according to the type of food you wish to
cook.
Tip, especially for meat: The cooking
2
results on the automatic programs may
vary depending on origin, cut and quality
of the food being cooked, the programs
have been set and tested for good quality
food.
Similarly, the thickness of the meat must
be taken into account during cooking; you
should not cook foods with a thickness
greater than 4 cm.
If you are uncertain about which cooking
program to use, please refer to the cooking
4
guide page 13.
3. Press the "OK" button: the appliance starts
preheating and the cooking level indicator
flashes white.
NB: If you have selected the wrong
program, turn off the appliance and repeat
the steps.
4. Wait for preheating to be complete.
5. When the level indicator stops flashing
white and the grill beeps, the preheating
is complete, the grill is ready to cook.
Comments: At the end of preheating, if
the appliance remains closed, the safety
system will turn off the appliance after a
while.
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gc784d

Table of Contents