Table 30 Firmware Features - ZyXEL Communications NWA570N User Manual

Chapter 9 Product Specifications and Wall-Mounting Instructions
Table 29 Hardware Specifications (continued)
Recommended type of
screws for wall-mounting
Certifications
Firmware Specifications

Table 30 Firmware Features

FEATURE
Default IP Address
Default Subnet Mask
Default Password
Device Management
Wireless Functionality
Operating Modes
Security
96
M3 Tap Screw
Safety
ANSI/UL-1950 3rd, CSA C22.2 No. 950 3rd, EN60950
(1992+A1+A2+A3+A4+A11), IEC 60950 3rd
EMI
FCC Part 15 Class B, EN55022 Class B, EN61000-3-2, EN61000-3-3
EMS
EN61000-4-2/3/4/5/6/8/11
DESCRIPTION
192.168.1.2
255.255.255.0 (24 bits)
1234
Use the web configurator to easily configure the rich range of features on
the NWA570N.
FTP//Web for firmware downloading and configuration backup and
restore.
Limitation of client connections (# is configurable, default: unlimited)
Intra BSS Block (enable/disable)
Output Power Management (4-levels)
Allows IEEE 802.11n draft 2.0 and either IEEE 802.11b or IEEE 802.11g
wireless clients to connect to the NWA570N wirelessly. Enable wireless
security (WEP, WPA(2), WPA(2)-PSK) and/or MAC filtering to protect
your wireless network.
Note: The NWA570N may be prone to RF (Radio
Frequency) interference from other 2.4 GHz devices
such as microwave ovens, wireless phones,
Bluetooth enabled devices, and other wireless LANs.
Access Point
Client
Bridge (up to four bridge links supported)
Access Point and Repeater
WPA and IEEE 802.1x security (EAP-TLS, EAP-TTLS, LEAP,. EAP-
PEAP and Win XP PEAP included)
64/128/152-bits WEP
WPA/WPA2 support based on 802.11i standard
Dynamic WEP key exchange
MAC address filtering through WLAN (supports up to 32 MAC address
entries
AES support
ZyXEL NWA570N User's Guide