Logs; Figure 42 Management: Logs; Table 26 Management: Logs - ZyXEL Communications NWA570N User Manual

Chapter 7 Management Screens
Table 25 Management: Password (continued)
LABEL
Apply
Cancel

7.3 Logs

Click Management > Logs to open the Logs screen.
You can view logs and alert messages in this screen. Once the log table is full, old logs are
deleted as new logs are created.
Click a column heading to sort the entries. A triangle indicates the direction of the sort order.

Figure 42 Management: Logs

The following table describes the labels in this screen.

Table 26 Management: Logs

LABEL
Display
Refresh
Clear Log
#
Time
Message
Source
Destination
Note
84
DESCRIPTION
Click Apply to save your changes back to the device.
Click Cancel to reload the previous configuration for this screen.
DESCRIPTION
Select a category of logs to view.
Click Refresh to renew the log screen.
Click Clear Log to clear all the logs.
This is the log's index number.
This field displays the time the log was recorded. It is the number of seconds since
the last time the system turned on.
This field states the reason for the log.
This field lists the source IP address and the port number of the incoming packet
that caused the log.
This field lists the destination IP address and the port number of the outgoing
packet that caused the log.
This field displays additional information about the log entry.
ZyXEL NWA570N User's Guide