Figure 33 Wireless Settings: Bridge; Table 15 Wireless Settings: Bridge - ZyXEL Communications NWA570N User Manual

Chapter 6 Wireless Screens

Figure 33 Wireless Settings: Bridge

The following table describes the labels in this screen.

Table 15 Wireless Settings: Bridge

LABEL
Basic Settings
Operation
Mode
Channel
Wireless
Mode
66
DESCRIPTION
Select the operating mode from the drop-down list. The options are Access Point,
Wireless Client, Bridge and AP+Repeater.
Note: If you are configuring the device from a computer connected
to the wireless LAN and you change the device to use bridge
mode, you will lose your wireless connection when you click
Apply to save your settings. You must then connect to the
device through the wired network.
The range of radio frequencies used by IEEE 802.11b/g wireless devices is called
a channel.
Select a wireless channel if interference from other nearby devices is a problem.
The NWA570N and wireless devices in your network must use the same channel.
Select 802.11b/g to allow IEEE 802.11b and IEEE 802.11g compliant WLAN
devices to associate with the device.
Select 802.11n/g to allow IEEE 802.11n and IEEE 802.11g compliant WLAN
devices to associate with the device.
ZyXEL NWA570N User's Guide