Honda CB500X 2020 Owner's Manual page 119

Tighten the left axle pinch bolts to hold
4.
the axle shaft.
Install and tighten the axle bolt.
5.
Torque: 38 lbf·ft (51 N·m, 5.2 kgf·m)
Loosen the left axle pinch bolt.
6.
Tighten the right axle pinch bolt.
7.
Torque: 16 lbf·ft (22 N·m, 2.2 kgf·m)
Install the brake caliper and tighten the
8.
mounting bolts.
Torque: 22 lbf·ft (30 N·m, 3.1 kgf·m)
Take care to prevent the brake caliper
u
from scratching the wheel during
installation.
Use new mounting bolts when
u
installing the brake caliper.
Tire Puncture
NOTICE
When installing a wheel or caliper into original
position, carefully fit the brake disc between the
pads to avoid scratching them.
Lower the front wheel on the ground.
9.
Apply the brake lever several times. Then,
10.
pump the fork several times.
Retighten the left axle pinch bolt.
11.
Torque: 16 lbf·ft (22 N·m, 2.2 kgf·m)
Removing Wheels
u
Continued
117