Honda CB500X 2020 Owner's Manual page 117

#
Front Wheel
Removal
Place your vehicle on a firm, level surface.
1.
Cover the right side of the front wheel
2.
and brake caliper with protective tape or
cloth.
On the right side, remove the mounting
3.
bolts and brake caliper.
Support the brake caliper assembly so
u
that it doesn't hang from the brake
hose. Do not twist the brake hose.
Avoid getting grease, oil, or dirt on the
u
disc or pad surfaces.
Do not pull the front brake lever while
u
the brake caliper is removed.
Tire Puncture
Take care to prevent the brake caliper
u
from scratching the wheel during
removal.
Remove the front axle bolt.
4.
Loosen the right axle pinch bolt.
5.
Tape or cloth
Brake caliper
Wheel speed sensor
CB500XA only
Removing Wheels
u
Mounting bolts
Axle pinch bolt
Front axle bolt
Right side collar
Pulser ring
CB500XA only
Continued
115