Step 2.
Install the wireless WAN card and wireless WAN card bracket in reverse order.
Type 2
Note: A Mylar film might cover the wireless WAN card. To access the wireless WAN card, peel off the film
first.
Step 1.
Remove the the wireless WAN card and wireless WAN card bracket as shown below.
Step 2.
Install the the wireless WAN card and wireless WAN card bracket in reverse order.
Note: During installation, ensure that you connect the cables with different colors to the
corresponding connectors on the card according to the illustrations above: the orange cable to the
connector labeled ORANGE, the blue cable to the connector labeled BLUE, the white and grey
.
Chapter 6
CRU replacement
33