Polygroup TG76M3P68X00 Assembly Instructions

TREE ASSEMBLY INSTRUCTIONS
Congratulations on purchasing your new tree from
below on how to quickly and easily set up your new tree.
1. Before you start to assemble your tree, choose an appropriate location.
2. Assemble the tree stand and place on a level surface. (See Fig. A)
Fig. A - Tree Stand Assembly
Fig. B - Tree Assemble
Section 1
3. Each tree section is numbered with a sticker. Please identify all sections before assembling.
4. Assemble the tree from the bottom to the top. Start with the bottom section and remove protective
cap before inserting into the assembled stand. Make sure the pole is firmly inserted and secured into
the stand. (See Fig. B)
5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.
6. Allow branches to fall into place or gently pull up and out.
7. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest
from the pole and fan out one to the right, one to the left and one at the center of the main stem.
(See Fig. C)
Fig. C
Top view
8. After shaping the entire tree following the previous step, slightly upsweep all branch tips for
a uniform look. Shift branches to fill any gaps. Your Christmas tree is now complete and ready
to be decorated.
MODEL #: TG76M3P68X00 SKU: 741-613
Polygroup®!
Tree top
Section 2
Side view
Carefully follow the instructions
Unfold the legs and lay the
stand in a flat area. Then slide
the locking disc downward and
snap into place.
1